The ByrdRench multi-tool is a departure from typical pocket tools on the market. It features a full-sized knife with a locking 8Cr13MoV stainless steel blade with ambidextrous hole for one-hand opening. The ByrdRench housing is two stainless halves that join creating slip joint pliers with a large or small bite. On the other end there is an adjustable 9/16” crescent wrench. Both work comfortably in the hand with contoured edges so there are no pinched fingers.
The two halves separate to reveal a set of four screwdriver bits including: a #2 and #3 Phillips-head as well as a #1 and #2 flat-head. The bit housing accepts any standard 1/4" sized bit including Allen and Torx® wrenches to customize your tool arsenal. A rough file combination hole-starter slide into a spring set in the housing above the bits. A pivot holds the tool’s two halves together. When rotated, the pieces extend and lock into a full-length easy to grip and torque magnetized screwdriver or crescent wrench. Releasing the pivot separates the screwdriver and knife portion of the tool from the crescent wrench. This allows you to use the crescent wrench and the screwdriver/knife independently and/or simultaneously. The Byrdrench also comes with a pocket clip and nylon sheath.